HOUSE / COMMERCIAL WIRING INSTALLATION TRAINER (Model : TMS-HIT)
SALIENT FEATURES
- Facilitates hands on practice of house & commercial control schemes and wiring
- Learn how classic tube light and high inte nsity lamps work
- Solar DC lamps and their connections
- Learn troubleshooting skills for home appliance repair
- Facilitates easy and safe wiring by students due to use of 4mm shrouded banana patch cords and shrouded sockets for high voltage circuit.
- Set of students workbook (SW) and instructors guide (IG).
Technical Specifications
Aluminum profile sturdy flat demo panel (table top) system, having top row carrying tube, led lamp, metal halide/ halogen etc. while bottom 3 rows carry various device panels as below & the bottom pull out drawer with rigid PVC board for wiring practice.
- 1 Phase AC input supply panel (EMT16A)
- 1ph. MCBs of 4A/1.6A - 2nos.
- Grounding & protection panel (EMT36)
- Consists of a 2 pole Earth Leakage Circuit Breaker (ELCB) 25A with current imbalance of 30mA.
- One NO push button to create Earth leakage fault.
- One SPDT to select HI- leakage or LO-leakage fault.
- One 15W bulb for Hi-Leakage fault & 22KW resistor for Lo leakage fault.
- Integrated AC (1 phase) measurement panel (EMT20F)
- 1 nos of Digital meter for 1 ph. parameters V, I, PF, W, Wh, VA, VAR, Hz, etc.
- Current specs = 1A/5Afor 1ph. meter (170-250V).
- AC Powered lamp panel (HIT1) - 2nos
- AC power supply for metal halide lamp 70W (max. 5KV)
- Input 230VAC/0.4A
- Sockets for halogen, electric ballast tube light & electronic LED tube light.
- DC Power supply panel (HIT2)
- SMPS power supply for LED
- Input 230VAC, Output +12V/5A, 60W
- DC supply for down lighter
- Switches panel (HIT3)
- One way switch = 2 nos
- Two way switch = 2 nos
- Buzzer/bell switch/ Neon panel (HIT4)
- Buzzer/Bell, I/P 230VAC
- Bell switch
- Neon lamp indicator
- Kitkat fuse
- Dimmer/Fault panel (HIT5)
- Dimmer
- Fault = 2 nos
- Sockets panel (HIT6)
- Three pin AC mains Sockets = 3 nos
- 230V/10Arating
- DP switch panel (HIT7)
- Double pole single through four terminal S/W= 2nos
- Rating 32A/240VAC
- Lamp panel (EMT7)
- Incandescent lamp = 3 nos., CFL tube = 1 no
- Various Lamp/Tubes provided
- Metal Halide lamp (70W)
- Electronic tube
- Point source LED
- Strip LED
- Electric Tube
- Halogen Lamp (250W)
- Display panel (HIT8) showing various wiring accessories
- Conduit, Elbow joints, casing taping,
- Cleats, Batten with clips, cable/wires etc.
Low / High pressure sodium & mercury vapour lamp panel (EMT88) [Optional]
- Sodium vapour lamp : 35W & 150W
- Mercury lamp : 35W
- PFC capacitor (CAN type) : 15 uF /440VAC
- Electronics ignitor : 3 terminal
- Inductor : 0.45H / 1A
- Wiring practice board (1100X300X20 mm)
- A replaceable 20mm Rigid PVC board is mounted as bottom pull out drawer. It is used for wiring practice by students using self tapping screws & wiring accessories use drilling machine to drill holes. Avoid banging by hammer. Use Screw Driver.
List of Experiments
- Electrical Safety Rules for working in laboratories
- Variety of wiring experiments based on above operational panels
- Study of Protective Devices Panel
- Study and use of Measurement Devices
- Understanding working of various types of lamps including tube, led & other high intensity lamps
- Hands on wiring practice using cables, casing and hand tools
- Testing and troubleshooting of faulty home appliances
- Construct & test the circuit to operate low/high pressure sodium vapour lamp.
- Construct & test the circuit to operate mercury vapour lamp.
- Tool kit : Screw driver, Star screw driver, Spanner, Nose plier, Insulated cutting plier, Insulating tape, self tapping screws, 3 nos. of test probes for troubleshoot home appliances, Drill machine (optional)
-
Mechanical Dimension (mm) of Trainer :
1168(L) x 300(W) x 990(H) - Net Weight : 42 Kg.
- Gross Weight : 50 Kg.
or reload the browser
or reload the browser
or reload the browser
or reload the browser
or reload the browser
or reload the browser
